Jump to content


GTroyer

Member Since 27 Feb 2002
Online Last Active Today, 05:05 AM
***--

#652966 Holy bad milage Batman!!! (Fuel leak)

Posted by GTroyer on 16 January 2018 - 03:20 PM

OH GEEEES don't tell him that , he'll be looking at his Holmes all day 




#652730 Dually Conversion Q's

Posted by GTroyer on 10 January 2018 - 02:10 PM

single tire Dana 80's are out there so the weight rating wouldn't necessarily change it you look at the newer single tire 3500's

 

I don't believe you'd go wrong doing this but IMHO save the bed [hang it in the garage rafters] and all the dual stuff so you could change it back or at least offer it to a buyer down the road.

 

as to the flat bed , if that's what your going with then why change out everything else , just change the bed and call it good. BTW flat beds are not low $$ items even used they are not low $$  ... and used ones usually need a ton of repair as I found out , by the time I was done converting mine and the repairs I could have bought a new one.

 

if you decide to change out to 2500 stuff the rear ends are not usually easy to sell and folks want them cheep .... but hold your price as the disk brake ones are not easy to find and $$$$ [in the $1000.00 range] beds are usually cheep , easy to come by and oft times near give away prices unless someone thinks he has gold. also suggest you do not store rear axle out in the weather as they will rust up badly and lower the value a bunch.




#652202 So anyone know of an improved 2nd gen track bar ?

Posted by GTroyer on 25 December 2017 - 11:28 AM

THANKS Russ ... from our friend also :)

 

I'll have to shout to him when I get back and find out if it works with Mag Hytec covers  [I still have the factory cover also if I have to ... not like I keep it real clean down there anymore[   LOL




#650535 Heater motor

Posted by GTroyer on 15 November 2017 - 12:02 PM

thanks Ben , I was screwing around now to do that LOL

 

keeping in mind I'm NOT a computer wizard :)




#650471 25 point buck taken with crossbow

Posted by GTroyer on 14 November 2017 - 08:42 AM

http://www.freep.com...806001/?ref=yfp

 

 

wow just think .... something for your dreams Eh




#650390 Looking for...

Posted by GTroyer on 12 November 2017 - 06:24 PM

Lots on site have , many no longer post

John is a Boeing Machinest .. and is Very Very detailed orientated ... much under the hood is custom and many factory items replaced with improved custom machineing beautiful pieces as well as one of prototype pieces. Rarely left anything stock


#649720 I got stuck behind this yesterday

Posted by GTroyer on 25 October 2017 - 09:51 AM

I would drive it around to piss off the old folks (seems to work well)   :lol:

 

 

don't want to do that , one of us might just say F..it and ram ya   LOL   , ya never want to piss off an old guy as there isn't a threat by jail time anymore LOL




#649556 Fall refit for Loose Change

Posted by GTroyer on 21 October 2017 - 09:09 AM

I do not see an EJECT switch [as in the James Bond car seats] for those PIA - aka A-Hole guests or ones who "forget" to chip in on fuel for those nice outings 

 

other than that nice job 




#649460 One Up Offroad traction bars

Posted by GTroyer on 19 October 2017 - 01:00 PM

But that's back when you were a REAL MAN and lifted cars and Tractors for "fun" lol


#649425 Starting a new group

Posted by GTroyer on 19 October 2017 - 08:41 AM

good on ya Steve !!!  our youth are not well helped especially city kids in todays world.

 

a big brother type of thing I assume with religious backdrop is a great thing for young boys and or fatherless/absent father boys . 

 

I was lucky to have a large family to raise me as my Mom and Dad were divorced when I was 3 years old , Grandparents and many uncles and aunts were watching over me and my sister as my Mom worked nights and slept days. 

 

Scouting in a church based troop was very influential in my growing up and in my value system as well as a favorite uncle and aunt that took a very watchful and roll model roll and of course a ear lift and willow switch from Grandma and the ol belt of wisdom from Grandpa helped more than I think I would ever admit to  LOL

 

AGAIN THANK YOU for your time and efforts with youth !




#649361 Steering Box Upgrades for 2nd Gens

Posted by GTroyer on 17 October 2017 - 07:10 PM

I miss the old Gary..... :(

 

so what the hellll does that mean , you young whippersnapper  :mn:  :mn:  :mn: 




#648808 Tralier Advice

Posted by GTroyer on 30 September 2017 - 01:11 PM

now get yourself a sheet of 1" Sub-Flooring and then use it when you need that ramp area for flat load space ... also find a scale and get the weights empty figured out




#648363 Anyone buy this answer from e-trailers.com regarding max air pressure?

Posted by GTroyer on 18 September 2017 - 06:18 AM

Scott ... the bolt in stem has a rubber piece on each side of the rim the steel part of the valve stem don't touch the wheel




#647984 speedy trip to help a guy with a boat

Posted by GTroyer on 08 September 2017 - 08:09 PM

good on ya Brother !!!!!




#647861 what do you think of this fuel pump?

Posted by GTroyer on 06 September 2017 - 08:15 AM

Thumper ... I don't have one of these BUT you and I both know that snow will pack up any low level and even top of engine compartment area's  ... not one I'd want to install   MHO here ... especially when your building a cast off area for the pile.

 

 

BUTTT good news you have a early 24 valve and the boss is still there on yours for a mechanical pump and your early model cam has the lobe for that too ..  just grab up a 12 valve mechanical pump and install with a bypass pressure relief as the VP doesn't like 50+ lbs of pressure. several of us have this set-up .. in my case I did a cam install with the lobe as the 01's had no lobe on factory cam but did still have the boss for the pump.

 

where do you live [town] ?